Configuration; Device Function; Authentication Methods - Ricoh Aficio MP C2050 User Manual

PaperCut – Ricoh Embedded Manual

4 Configuration

After completing the Installation section and registering the device with PaperCut, it will have
been configured with reasonable default settings that are suitable for most environments.
This section covers how to change the default settings. All the following settings are
available via the device's 'Summary' tab in the PaperCut administration interface.

4.1 Device Function

The device function setting defines which functions will be available on the device and how it
will be used. Not all function settings are supported on all devices.
Each device function is discussed in the following table.
Device Function
Track & control copying
Enable release Station
Track & control scanning
Track & control faxing

4.2 Authentication Methods

PaperCut supports a number of different ways to authenticate users who walk-up to the
devices to perform copying. The default authentication method is username and password
authentication.
The available authentication methods can be modified in the 'External Device Settings ->
Authentication methods' section.
Copyright © 2012 PaperCut Software International Pty. Ltd., All Rights Reserved.
Revision: 19
Description
The device will be available for tracking walk-up off-the-glass
copying.
The device will be available as a print release station.
The device will be available for tracking scanning.
(supported on devices supporting SDK 4 or higher)
The device will be available for tracking faxing.
(Supported on devices supporting SDK 4 or higher. See section
6 for more information.)
2012-10-26
23 of 41