Operations Required To Use This Function (For The Administrator); Configuring Authentication Settings Of This Machine - Konica Minolta bizhub C654 User Manual

7.2

Operations required to use this function (for the administrator)

7.2 Operations required to use this function (for the administrator)
7.2.1

Configuring authentication settings of this machine

This section explains an example of setting General Settings to [ON (MFP)].
d
Reference
You can also configure settings so that authentication is performed in the LDAP server using the card ID reg-
istered in the authentication card (LDAP-IC Card Authentication). How to configure the setting is explained
using Web Connection. For details, refer to [User's Guide: Web Management Tool].
First, configure the authentication function of this machine (ON (MFP)).
0 To configure authentication settings, a service representative must enable IWS (Internal Web Server)
settings in advance. For details, contact your service representative.
1
Tap [Utility] - [Administrator Settings] - [Network Settings] - [IWS Settings].
2
Select [ON], then tap [OK].
% Restart this machine by following the on-screen instructions.
3
Tap [Utility] - [Administrator Settings] - [User Authentication/Account Track] - [General Settings] - [User
Authentication].
4
Set [General Settings] to [ON (MFP)], then tap [OK].
% When combining account track settings, press [Utility] - [Administrator Settings] - [User Authentica-
tion/Account Track] - [General Settings], and set [Synchronize User Authentication & Account Track]
to [Synchronize]. When separately managing the user authentication and account track, set to [Do
Not Synchronize].
bizhub C754/C654
7
7-3