Konica Minolta bizhub C654 User Manual page 88

7.4 Using Data Administrator (for the administrator)
2
Connect the authentication unit to the USB port of your computer.
The [Found New Hardware Wizard] dialog box appears.
% If the [Windows connect to Windows Update] screen appears, select [No, not this time], then click
[Next].
NOTICE
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
Do not connect another USB device to the same port as for the authentication unit. Doing so reduces
the USB power supply, resulting in an operation failure.
To use the USB hub, connect the self-power USB hub that supplies 500 mA or more.
3
Select [Install from a list or specific location (Advanced)], then click [Next].
bizhub C754/C654
7
7-14