Moving An Object Within The Same Cover Sheet; Moving An Object To A Different Cover Sheet - Canon MF7280 - ImageCLASS B/W Laser Driver Manual

NOTE
You can also select multiple objects by holding down [SHIFT] on the keyboard and
clicking each object that you want to select, or by dragging the pointer completely
over the objects. If you want to deselect any of the objects you selected, hold down
[SHIFT] on the keyboard ➞ click the objects that you want to deselect.

Moving an Object within the Same Cover Sheet

1
Select the object to move.
NOTE
You can select multiple objects and move them at the same time.
2
Drag the selected object to the desired location.
You can also use any of the four arrow keys [
object in the desired direction in 0.1 mm increments.
NOTE
•
Hold down [SHIFT] on the keyboard while dragging to move the object horizontally
or vertically only.
•
Hold down [CTRL] on the keyboard while dragging to copy the selected object and
drag the copy to the desired location.
•
If [Snap to Grid] is specified, holding down [SHIFT] on the keyboard while pressing
an arrow key moves the object in the direction of the arrow in half-grid space
increments. If [Snap to Grid] is not specified, holding down [SHIFT] on the
keyboard while pressing an arrow key moves the object in the direction of the arrow
in 2.0 mm increments.

Moving an Object to a Different Cover Sheet

1
Select the object to move.
NOTE
You can select multiple objects and move them at the same time.
2
Click [ ] (Cut) on the toolbar.
You can also select [Cut] from the [Edit] menu.
], [ ], [ ], or [
Creating an Original Cover Sheet
4
] to move the
4-23