Installing The Hdd Twain Driver; Installation Procedure; To Install The Software; Uninstalling - Konica Minolta bizhub C452 Driver Manual

Installing the HDD TWAIN Driver

2 Installing the HDD TWAIN Driver
Follow the procedure described below to install the HDD TWAIN driver.
The enclosed User Software CD-ROM is required to install the software.
2.1

Installation procedure

To install the software

1
Turn on the computer and start up Windows.
2
Insert the User Software CD-ROM into the computer's CD-ROM drive.
The CD menu appears.
3
Select "HDD TWAIN Driver" from "Scanner Install", and then follow the
instructions that appear.
Installation begins and the necessary files are copied to the computer.
When all of the necessary files have been copied to the computer, the
Installation Completed dialog box appears.
4
Click [Finish].
The HDD TWAIN driver is installed.
2.2

Uninstalling

The HDD TWAIN driver can be uninstalled using either of the following two
methods.
- Using "Add or Remove Programs" ("Add/Remove Programs" with Win-
dows 2000)
- Using Setup.exe again
Note
Before uninstalling, quit the HDD TWAIN driver.
HDD TWAIN driver
2
2-1