Konica Minolta bizhub C451 User Manual page 356

Reports and Lists
No.: Serial numbers are given respectively for sending and receiving.
Destination: Any of the following is described. Blank when there is no infor-
mation.
- TX Report: Name registered with the destination in the Address Book or
in the program
- RX Report: Name registered with the destination in the Address Book
- Recipient's destination
Start Time: Describes the start time of the communication.
Time: Fixed in "--:--:--".
Prints: Describes the number of pages sent. In case of memory transmission,
the sent pages and the total number of pages are described in fractional for-
mat.
Result:
OK
S-OK
PW-OFF
TEL
NG
Cont
No Ans
Busy
M-Full
LOVR
POVR
FIL
DC
MDN
DSN
Remarks: Describes one of the following in the Network fax description.
ORG
MIX
SP
C451
Described when communication is terminated normally.
Described when communication has stopped.
Described when operation power switch was turned OFF during communica-
tion.
Described when there is telephone call.
Described when there is communication error.
Described when there is a transmission error and that there is transition to re-
send wait mode (Error page redial).
Described when there is no response from the recipient.
Described when communication is not possible as the recipient's line is busy.
Described when it is not possible to receive a fax when the fax file memory
becomes full during reception.
Reception length over. Described when default length of received original ex-
ceeds.
Received page over. Described when number of received pages exceeds
3000 pages.
File error. Described when received file type is not supported.
Decode error. Described when error is generated in decoding of received file.
Described when there is error in MDN response.
Described when there is error in DSN response.
Original size specification
Mixed Original transmission
Special Original
FME Frame Erase transmission
BND Binding Position
10
10-5