Konica Minolta bizhub C451 User Manual page 317

Utility mode
– For details on text input operation, refer to "Entering text" on
page 11-3.
Sender name is registered.
6
When two or more Sender names are registered in the Sender name
setting list, touch [Set as Default] and set the initial value.
– The Sender source that is set to the default value here is initial value
of the [Fax Header Settings] of [Communication Settings].
7
Touch [Close].
8
Touch [Sender Fax No.].
9
Enter fax number using keypad, [+], [Space], [←], [→], and touch [OK].
– To delete all entered characters, press [C] (clear) key on the control
panel.
– [+]: + is entered.
– [Space]: Space is entered.
[←]: Moves the cursor to the left.
–
C451
9
9-71