Konica Minolta bizhub C451 User Manual page 35

Before use
No. Name
6 [Reset] key
7 [Interrupt] key
8 [Stop] key
9 [Proof Copy] key
10 [Start] key
11 [Data] indicator
12 [C] (clear) key
13 Keypad
14 [Help] key
15 [Enlarge Display] key
16 [Accessibility] key
17 [Power Save] key
C451
Description
Press to clear all settings (except programmed
settings) entered in the control panel and touch
panel.
Press to enter Interrupt mode. While the ma-
chine is in Interrupt mode, the indicator on the
[Interrupt] key lights up in green and the mes-
sage "Interrupted" appears on the touch panel.
To cancel Interrupt mode, press [Interrupt] key
again.
Press to stop the scanning of the original.
If the [Proof Copy] key is pressed before the
[Start] key is pressed, a finished preview with
the currently specified settings applied is dis-
played in the touch panel. (page 2-59)
Press to begin operation of the mode selected:
Box, Fax/Scan or Copy. If a Fax/Scan mode is
selected, transmission will begin. When the ma-
chine is ready to begin the operation, the indica-
tor on the [Start] key lights up in blue. If the
[Start] key indicator lights up in orange, the se-
lected operation is unable to begin.
Flashes blue while print job or fax is being re-
ceived.
Lights up blue while print job or fax is in printing
queue or is being printed.
Press to erase a value entered using the keypad
or characters entered using the screen key-
board.
Use to type in numbers. Use this key to enter tel-
ephone numbers or various setting values.
Press to display the help screen.
Explanations and operating procedures for this
machine's functions can be displayed on the
screen.
Press to change to Enlarge Display mode.
If authentication is performed with PageScope
Authentication Manager, it does not enter En-
large Display mode.
For details, refer to the User's Guide [Enlarge
Display Operations].
Press to change to the accessibility function
settings screen.
For details, refer to the User's Guide [Copy Op-
erations].
Press to change to the Power Save mode. While
the machine is in Power Save mode, the indica-
tor on the [Power Save] key lights up in green
and the display on the touch panel disappears.
To cancel Power Save mode, press [Power
Save] key again.
1
1-7