Konica Minolta bizhub C451 User Manual page 185

Specifying Utility mode parameters
9
Touch [Password], and then type in the password, using the keyboard
that appears.
10
Touch [OK].
11
Touch [↑] or [↓].
New screen 2/3 appears.
12
Touch [Host Address], and then type in the IP address or host name.
– To enter a host name, touch [Host Name Input], and then type in the
host name, using the keyboard that appears.
– To enter an IP address, touch [IPv4 Address Input] or [IPv6 Address
Input], and then type in the address, using the keypad or the
number buttons that appear. Touch [←] or [→] to move the cursor
to the desired position, and then type in the numbers.
– When the input format is switched to entering an IP address after
the host name was entered, the host name is cleared.
– If [Host Name Input] is touched after the IP address was entered,
the entered IP address is saved and the input screen appears.
– Type the host name and file path in uppercase letters.
– When sending an SMB transmission using an IPv6 address, set "Di-
rect Hosting Setting" to "ON". For details, refer to "Direct Hosting
Setting" on page 4-61.
13
Touch [OK].
14
Touch [File Path], and then type in the file path, using the keyboard that
appears.
– To check the contents of the shared folders, touch [Reference].
C451
3
3-19