E-Mail Rx (Pop) - Konica Minolta bizhub C451 User Manual

Network Settings
4.10

E-Mail RX (POP)

Specify these settings when authentication of the e-mail sender is performed
by POP before SMTP. Settings can be specified for the following.
E-Mail RX (POP) screen 1/4
Parameter
POP Server Address
Connection Timeout
E-Mail RX (POP) screen 2/4
Parameter
SSL Setting
Port No.
Port Number (SSL)
E-Mail RX (POP) screen 3/4
Parameter
Login Name
Password
APOP Authentication
!
Detail
When using APOP to log on to the POP server, the password is encrypt-
ed with Digest-MD5. If "APOP Authentication" was set to "ON", it is not
possible to log on to the server if the POP server is not compatible with
APOP.
C451
Description
Specify the address of the POP server used to send e-mail mes-
sages. For details, refer to "POP Server Address" on page 4-88.
If communication stops while an e-mail message is being received
from the POP server, the e-mail reception operation is automati-
cally aborted after a specified length of time has passed. Specify
the length of time from the point when the reception stops to the
point when the reception operation is to be aborted. To change the
setting, touch [+] or [−] to specify the setting (in 30-second incre-
ments). (Range: 30 to 300 seconds)
Description
Select whether or not SSL is used during e-mail receptions. When
SSL is used, the communication settings are encrypted.
Specify the number of the port used for communicating with the
POP server. To change the setting, touch [Input], press the [C]
(clear) key, and then use the keypad to type in the desired port
number. (Range: 1 to 65535)
Specify the port number when SSL is used. To change the setting,
touch [Input], press the [C] (clear) key, and then use the keypad to
type in the desired port number. (Range: 1 to 65535)
Description
Specify the logon name for connecting to the POP server. Use the
keyboard that appears in the touch panel to type in the logon name
(63 characters or less).
Specify the password for connecting to the POP server. Use the
keyboard that appears in the touch panel to type in the password
(15 characters or less).
Select whether or not the logon name and password are encrypted
when logging on to the POP server.
4
4-84