Reset Data After Job - Konica Minolta bizhub C451 User Manual

Specifying Utility mode parameters
3.9

Reset Data After Job

Select whether or not the settings, such as the scanning settings specified
during a transmission, are canceled after the transmission is completed. The
following settings can be selected.
Setting
Reset All
Reset Destina-
tion Only
Confirm with
User
1
Touch [1 System Settings] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator Settings screen" on page 3-7.
2
Touch [9 Reset Settings].
3
Touch [3 Job Reset].
4
Touch [Next Job].
5
Touch [Reset Data After Job].
C451
Description
All parameters are returned to their default settings.
Cancel only the destination settings.
A confirmation message appears, asking whether or not to cancel the set-
tings.
3
3-57