Chipset - Asus P5KPL-CM 1600 User Manual

CPU TM function [Enabled]
Enables or disables Intel
protection function. When enabled, the CPU core frequency and voltage is reduced when the
CPU overheats. Configuration options: [Enabled] [Disabled]
Execute Disable Bit [Enabled]
Allows you to enable or disable Execute Disable Function.
Configuration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel
supports the Enhanced Intel SpeedStep
Intel SpeedStep Technology [Enabled]
®
Allows you to use the Enhanced Intel
can adjust the system power settings in the operating system to use the EIST feature. Set this
item to [Disabled] if you do not want to use the EIST.
Configuration options: [Enabled] [Disabled]
2.4.4

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then
press <Enter> to display the sub-menu.
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above the total
physical memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to select the amout of system memory used by the Interanal graphics device.
Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
PEG Port Configuration
PEG Force x1 [Disabled]
Allows you to enable or disable the PEG Forec x 1.
Configuration options: [Enabled] [Disabled]
2-14
CPU Thermal Monitor (TM2) function, a CPU overheating
®
SpeedStep
®
Pentium
®
Technology (EIST).
®
Technology. When set to [Enabled], you
®
4 or later CPU that
®
ASUS P5KPL-AM/PS