Lexmark E322 - Printer - B/W Setup Manual page 39

Printing
Paper handling
Maintenance
Troubleshooting
Administration
Index
2
Select the Printing menu, and then select Configuration.
3
Select the options that match what is installed on the printer.
Troubleshooting
If you are having trouble with your print server on an AppleTalk network (EtherTalk,
TokenTalk, or LocalTalk), do these steps in the order shown before you call the Customer
Support Center.
1
Make sure the AppleTalk protocol is turned on (activated) in the print server. To find
out, press the operator panel button to print a network setup page and look in the
paragraph under AppleTalk.
2
Make sure the status of the MarkNet print server is "connected". To find out, look on
the network setup page for Status.
3
Do you see the printer in the Chooser?
–
If no, restart the Macintosh workstation and look again.
–
If yes, make sure the printer name in the Chooser exactly matches the AppleTalk
name listed on the network setup page.
4
Check all connections. Check the cables on the back of the Macintosh workstation.
Check the cable between the printer and the workstation or network.
www.lexmark.com
Lexmark E320/E322 Printer
Setting up the network printer 39