Lexmark E322 - Printer - B/W Setup Manual page 32

Printing
Paper handling
Maintenance
Troubleshooting
Administration
Index
Disadvantages of using RPRINTER in NetWare 3.x:
Little information is available about the print job. After a job leaves a print server queue, it is
removed from the queue, regardless of whether it actually prints. This could cause a print job
to be lost, if the printer is turned off in the middle of the print job. This is inherent in the
NetWare design.
PSERVER in NetWare 3.x
Advantages of using PSERVER in NetWare 3.x:
•
Does not require that PSERVER.NLM be installed on the NetWare server.
•
Does not require you to unload PSERVER.NLM or restart your computer after
installation.
•
Performance. Although overall print job throughput is affected by many factors, file
transfer time on the network may be significantly faster using PSERVER.
In NPRINTER/RPRINTER, NetWare uses SPX to transfer packets. Packet size for
data transmitted in SPX is 512 bytes.
In PSERVER, NetWare uses IPX to transfer packets. Packet size for data transmitted
in IPX is up to 1 Kilobyte for Ethernet networks.
www.lexmark.com
Lexmark E320/E322 Printer
Setting up the network printer 32