Lexmark E322 - Printer - B/W Setup Manual page 25

Printing
Paper handling
Maintenance
Troubleshooting
Administration
Index
3
Verify that the protocol that you are trying to use is installed properly on the server.
(Hint: Start, Settings, Control Panel, Network, Protocols). Look for TCP/IP or DLC
(LexLink).
4
Issue a ping command to the print server.
ping
157.184.8.231
5
Establish an FTP session with the print server.
ftp
157.184.8.231
6
Using the FTP "put" command, print a file. The file you use with FTP can be in PCL or
PostScript emulations, PDF, HTML or any other language the printer understands. If
the file prints, this confirms the TCP/IP protocol is working properly in the MarkNet
print server.
put mytest.ps or
put mytest.txt
7
Reset both the print server and the printer.
8
If possible, shut down Windows NT Server and restart the server. There could be a
spooler problem that requires a restart.
9
Try printing again.
www.lexmark.com
Lexmark E320/E322 Printer
Setting up the network printer 25