End Of The Washing Program; Removing The Load; Standby Mode - Electrolux FAVORIT 65411 VI User Manual

2. Set a new washing program.
Fill the detergent dispenser with detergent before you set a new washing program.

End of the washing program

The washing program is complete when:
• The appliance stops automatically.
• The audible signal for the end of the program operates.
1. Open the door.
– The digital display shows 0.
– The indicator light for the completed program stays on.
2. Switch off the appliance.
– For better drying results, keep the door ajar for some minutes before you remove the
dishes.
Let the dishes cool down before you remove them from the appliance. Hot dishes are easily
damaged.

Removing the load

• First remove items from the lower basket, then from the upper basket.
• There can be water on the sides and door of the appliance. Stainless steel becomes cool
more quickly than the dishes.

Standby mode

If you do not switch off the appliance at the end of the washing program, the appliance
automatically goes into standby mode. The standby mode decreases power consumption to
less than 1 watt.
Three minutes after the end of the program, all indicator lights go off and the digital dis-
play shows one horizontal bar.
Press one of the buttons (not the on/off button), to go back to end of program mode.
Select and start a washing program
21