Interruption Of A Washing Programme; How To Cancel A Washing Programme Or A Delay Start; At The End Of The Washing Programme - Electrolux Favorit 99000 User Manual

16
Select and start a washing programme
3. Select, if necessary, options. Refer to 'Control panel'.
4. Select a washing programme. Refer to 'Washing programmes'.
5. Press the OK/Start button. The washing programme starts automatically.
– If the delay start is set, the countdown starts automatically. When the countdown
is completed, the washing programme starts automatically.
– If the salt container and /or the rinse aid dispenser are empty, the related messages
show in the display and the appliance will not start. Press the OK/Start button again
to start the washing programme.
Fill the salt container and/or the rinse aid dispenser when the appliance is empty and before
you start a washing programme.
If the delay start is set, the opening of the appliance door interrupts the countdown. When
you close the door, the countdown continues from the point of interruption.

Interruption of a washing programme

• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point of interruption.

How to cancel a washing programme or a delay start

If a washing programme or a delay start has not started, you can change the selection.
When a washing programme or a delay start operate, it is not possible to change the
selection. It is necessary to cancel the washing programme or the delay start.
When you cancel the delay start, this automatically cancels the selected washing pro-
gramme. You have to select the washing programme again.
1. Press the cancel button.
2. The display shows the message CONFIRM CANCEL ? .
3. Press the OK/Start button to confirm.
Make sure that there is detergent in the detergent dispenser before you start a new washing
programme.

At the end of the washing programme

• The appliance stops automatically.
• The audible signals operate.
1. The display shows the messages PROGRAMME END and PLEASE SWITCH OFF .
If the salt container and /or the rinse aid dispenser are empty, the related messages show
in the display.
2. Open the appliance door.
3. Switch off the appliance.
4. For better drying results, keep the door ajar for some minutes.