Table of Contents
Advertisement
start of the selected washing programme can be delayed for between 1 and 19
hours.
2. Close the dishwasher door, the countdown starts automatically.
3. The countdown will decrease with steps of 1 hour.
4. The opening of the door will interrupt the countdown. Close the door; the
countdown will continue from the point at which it was interrupted.
5. Once the delay start has elapsed the programme will start automatically.
Once the washing programme has started, a point-shaped optical signal appears
on the floor beneath the dishwasher's door.
This optical signal will remain illuminated for all the duration of the washing pro-
gramme.
If the appliance has been installed higher up with a furniture door mounted flush,
the optical signal will be no longer visible.
WARNING!
Interrupt or cancel a washing programme in progress ONLY if it's absolutely
necessary. Attention! Hot steam may escape when the door is opened. Open
the door carefully.
Cancelling a delay start or a washing programme in
progress
• Simultaneously press and hold the two programme buttons positioned over the
word RESET , until all the programme button lights will illuminate.
• Cancelling a delay start involves also the cancelling of the washing programme
set. In this case you have to set the washing programme again.
• If a new washing programme is to be selected, check that there is detergent in
the detergent dispenser.
Interrupt a washing programme in progress
• Open the dishwasher door; the programme will stop. Close the door; the pro-
gramme will start from the point at which it was interrupted.
End of the washing programme
• The dishwasher will automatically stop and an audible signal informs you of the
end of the washing programme.
Select and start a washing programme
25
Advertisement
Table of Contents
