Setting And Starting A Washing Program; When The Washing Program Is Comple - Electrolux ESL 67040 User Manual

SETTING AND STARTING A WASHING PROGRAM

STARTING THE WASHING PROGRAM
WITHOUT DELAY START
1. Switch on the appliance. Make sure that
the appliance is in setting mode.
2. Set the washing program.
• The number related to the washing
program flashes in the display.
3. Close the appliance door, the washing
program starts.
STARTING THE WASHING PROGRAM
WITH DELAY START
1. Switch on the appliance. Make sure that
the appliance is in setting mode.
2. Set the washing program.
3. Press the delay start button repeatedly
until the display shows the time of the
delay start.
• The time of the delay start flashes in
the display.
• The delay start indicator is on.
4. Close the appliance door, the count-
down starts.
When the countdown is completed, the
washing program starts automatically.
The opening of the appliance door in-
terrupts the countdown. When you
close the door, the countdown contin-
ues from the point of interruption.
CANCELLING THE DELAY START
If the appliance door is open, and the
countdown has not started
1. Press the delay button repeatedly until
the display shows the number of the
washing program.
• The program number flashes in the
display.
2. Close the appliance door, the washing
program starts.
If the appliance door is closed, and the
countdown operates
1. Open the appliance door.
2. Press the delay button repeatedly until
the display shows the number of the
washing program.
• The number flashes for some sec-
onds and then the time of the wash-
ing program shows in the display.
3. Close the appliance door, the washing
program starts.
Warning! Only interrupt or cancel a
washing program if necessary.
Attention! Open the door carefully.
Hot steam and water can escape.
INTERRUPTING A WASHING
PROGRAM
• Open the appliance door. The washing
program stops.
• Close the appliance door. The washing
program continues from the point of in-
terruption.
CANCELLING THE WASHING
PROGRAM
If the washing program has not started, you
can change the selection.
To change the selection while the washing
program operates, it is necessary to cancel
the program.
• Press the Reset button until the display
shows two horizontal status bars.
Make sure that there is detergent in the
detergent dispenser before you start a
new washing program.
END OF THE WASHING PROGRAM
When the washing program is completed,
an intermittent acoustic signal sounds.
1. Open the appliance door.
• The end indicator is on
• The display shows a zero.
2. Switch off the appliance.
For better drying results, keep the ap-
pliance door ajar for some minutes.
REMOVING THE LOAD
• Let the dishes cool down before you re-
move them from the appliance. Hot
dishes are easily damaged.
• First remove items from the lower basket,
then from the upper basket.
• There can be water on the sides and
door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.
electrolux 11