Drying; Cleaning And Maintenance - Electrolux EDI 96150 User Manual

22 electrolux starting an iron aidtm programme
Iron Aid programme complete /
removing laundry
After the Iron Aid phase has ended, 0. 0 0
is illuminated and the message
ANTICREASE appears in the display.
If the BUZZER (ALARMA) has been
activated, an audible signal sounds at
regular intervals.
The Iron Aid programme is automat-
ically followed by an anti-crease
phase, including brief steam phas-
es, which lasts around 90 minutes.
The drum rotates during the anti-crease
phase. This keeps the laundry loose and
free of creases. It can be removed at any
point during the anti-crease phase, ex-
cept during steam phases (look for
steam animation in the display!). Laun-
dry should be removed as quickly as
possible.
1. Open the loading door to remove the
laundry.
2. Before removing the laundry, remove
fluff from the micro-fine filter. It is best
to use a damp hand for this purpose.
(See "Cleaning and maintenance"
section.)
3. Remove laundry one garment at a
time.
To retain the effects of the Iron Aid
treatment, clothes must be removed
one garment at a time during the
anti-crease phase and hung imme-
diately on a clothes hanger to dry
(for at least 5-15 mins, depending on
fabric and selected steam level). Do
up the buttons and tug the garment
into shape, paying particular atten-
tion to cuffs and seams.
4. Turn the programme knob to O OFF.
Important! After each drying cycle
– Clean the micro-fine filter and fine fil-
ter
– Drain the condensed water contain-
er
(See section "Cleaning and mainte-
nance".)
5. Close door.