Related Manuals for EdgeStar KC2000SSTWIN
Summary of Contents for EdgeStar KC2000SSTWIN
- Page 1 Beer Dispenser Models: KC2000TWIN, KC2000SSTWIN Dual-tap Tower Installation Guide For more information on other great EdgeStar products on the web, go to http://www.edgestar.com...
- Page 2 Introduction Thank you for choosing EdgeStar. This guide is a supplement to the EdgeStar Beer Dispenser Guide for your KC2000TWIN or KC2000SSTWIN EdgeStar Full Size Dual Tap Kegerator & Draft Beer Dispenser. Please follow the EdgeStar Beer Dispenser Guide for step-by-step instructions.
- Page 3 Quick Overview Diagram The image below should give you a visual reference on setting up your Kegerator.
- Page 4 Install and Secure the Tower 1. Remove the plastic plug from the top of the cabinet by opening the door and pushing up. 2. Place the rubber gasket on the cabinet and align the holes. (Note: Some models may require you drill holes on the top of the unit.) 3.
Need help?
Do you have a question about the KC2000SSTWIN and is the answer not in the manual?
Questions and answers
Is it okay to drill a drain hole in the drain pan in the upper left of the pan and down through the housing where the keg is stored.
The manual does not provide information on drilling a drain hole in the drain pan of the EdgeStar KC2000SSTWIN. Therefore, it is not possible to determine if it is safe.
This answer is automatically generated