Page 1
Thermoelectric Wine Cooler TWR282S Owner’s Manual For more information on other great EdgeStar products on the web, go to http://www.edgestar.com To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com V2.1-07282017...
Page 2
Important Safety Information Improper handling can cause serious damage to the EdgeStar wine cooler and / or injury to the user. This wine cooler is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other technical data related to this unit.
Page 3
General Safety To prevent back and other types of injuries, use at least two people to move and install the wine cooler. This appliance is not intended for use by persons, including children, with reduced physical, sensory, or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
Introduction Thank you for purchasing this EdgeStar wine cooler. We hope that this purchase will be the beginning of a lasting and rewarding relationship between you and EdgeStar. We will provide the customer support and exemplary products necessary to nurture that relationship.
Parts Identification Tip: Gather the model and serial number from the product label and write them down before loading the wine cooler. Exterior View Interior View (Without Door)
Installing the Wine cooler The wine cooler should be installed in accordance with local electrical code requirements. The wine cooler should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty. Before you plug the wine cooler into a power supply, be sure to let it stand upright for at least 24 hours to allow the temperature to acclimate.
Installation Clearance Requirements Important Notes: Choose a location that has an ambient temperature of 78° F. Operation outside this temperature may result in lowered efficiency or cause other adverse effects. This unit MUST be installed indoors in an area protected from the elements, e.g. wind, rain, water spray or drips.
Electrical Requirements ELECTRIC SHOCK HAZARD! Plug into a grounded 3-prong outlet. Never remove the grounding prong from the plug. Never use an adapter to bypass the grounding prong. DO NOT use an extension cord. Failure to follow these instructions can result in fire, electrical shock, or death. Before you move your wine cooler into its final location, it is important to make sure you have the proper electrical connection: A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National...
Operation Installation Check List Before Operation Have all packing materials and tape been removed from the interior and exterior of the wine cooler? Have the installation instructions been followed, including connecting the machine to electricity, and has proper grounding been installed for the wine cooler? Has the machine been leveled? Is the wine cooler in a site where the ambient temperature is around 78°...
Normal Sounds Your new wine cooler may make sounds that are not familiar to you. Most of the new sounds are normal. Hard surfaces like the floor and walls can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them.
Cleaning and Maintenance Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. Exterior Cleaning The door and cabinet may be cleaned with a mild detergent and lukewarm water solution such as 2 tablespoons of baking soda to 1 quart of water. Do not use solvent based or abrasive cleaners.
Troubleshooting Before Calling for Help If the unit appears to be malfunctioning, read through the “Operation” section of this manual first. If the problem persists, check the Troubleshooting Guide below and on the following page. The problem may be something that can easily be solved or explained. Symptoms Possible Causes Solutions...
Page 14
Symptoms Possible Causes Solutions The body of the wine cooler is The unit is not grounded Contact your local electrician electrified. properly. to test your electrical grounding system. Frost is forming in the wine The environment is humid. Manual defrosting is required; cooler.
Note: Technical data and performance information are provided for reference only. Specifications are subject to change. Check the rating label on the wine cooler for the most accurate information. Description of product Thermoelectric Wine Cooler Model TWR282S Voltage / Frequency AC 115V~60Hz Amperage 0.95 A Input Power...
PARTS: For a period of ONE (1) YEAR from the date of original purchase, EdgeStar will supply new, rebuilt, or refurbished parts free of charge. EdgeStar may request a defective part be returned in exchange for the replacement part. All replacement parts or products will be new, remanufactured, or refurbished.
Need help?
Do you have a question about the TWR282S and is the answer not in the manual?
Questions and answers