EdgeStar KC1000 Installation Manual

Kegerator

Table of Contents

Download this manual

KC1000 Kegerator Installation Guide

1. Faucet Handle

2. Beer Tower

3. Drip Tray

4. CO

Regulator

5. CO

Tube

6. CO

Cylinder (supplied empty)

7. American Sankey Keg Coupler

*Additional replacement parts may be included

8. Sixth Barrel (not included)

9. Beer Line

10. Neoprene Washer

11. Hose Clamp

12. Tower Plug

13. Tower Gasket

14. Screws (4)

Tools Needed:

- Wrench

- Flat Head Screwdriver

- Pair of Pliers/Clamp Crimper

For additional information

visit edgestar.com

Table of Contents

Do you have a question about the KC1000 and is the answer not in the manual?

Page 1 KC1000 Kegerator Installation Guide Tools Needed: 1. Faucet Handle 8. Sixth Barrel (not included) - Wrench 2. Beer Tower 9. Beer Line - Flat Head Screwdriver 3. Drip Tray 10. Neoprene Washer - Pair of Pliers/Clamp Crimper 4. CO Regulator 11.
Page 2 Power On Remove Plug Ensure the power light is Carefully remove the on and set the thermostat tower plug (#12) using the (+) and (-) located on the top of buttons to the desired the unit by opening the temperature. The cabinet, and with your recommended hand, push plug...
Page 3 Please refer to the owner’s manual for a full discourse on installation, usage and maintenance. If you have any questions about the installation of this appliance, feel free to contact EdgeStar service at 866.319.5473 or consult a qualified installer. Neither the manufacturer nor its distributors shall be liable for any incidental, consequential, indirect, special, or punitive damages of any nature, including without limitation, lost revenues or profits, or any other damage whether based in contract, tort, or otherwise.