Features Register Values And Settable Modes - Fujitsu MPC3096AT - Desktop 9.7 GB Hard Drive Product Manual

Table 5.5
Features Register
X'02' Enables the write cache function.
X'03' Specifies the transfer mode. Supports PIO mode 4, single word DMA mode
2, and multiword DMA mode regardless of Sector Count register contents.
X'55' Disables read cache function.
X'66' Disables the reverting to power-on default settings after software reset.
X'82' Disables the write cache function.
X'AA' Enables the read cache function.
X'BB' Specifies the transfer of 4-byte ECC for READ LONG and WRITE LONG
commands.
X'CC' Enables the reverting to power-on default settings after software reset.
At power-on or after hardware reset, the default mode is the same as that is set with a value
greater than X'AA' (except for write cache). If X'66' is specified, it allows the setting value
greater than X'AA' which may have been modified to a new value since power-on, to remain
the same even after software reset.
At command issuance (I/O registers setting contents)
1F7 (CM)
H
1F6 (DH)
H
1F5 (CH)
H
1F4 (CL)
H
1F3 (SN)
H
1F2 (SC)
H
1F1 (FR)
H
At command completion (I/O registers contents to be read)
1F7 (ST)
H
1F6 (DH)
H
1F5 (CH)
H
1F4 (CL)
H
1F3 (SN)
H
1F2 (SC)
H
1F1 (ER)
H
5 - 34

Features register values and settable modes

Drive operation mode
1 1 1 0
DV
xx
xx
xx
xx or transfer mode
[See Table 5.6]
Status information
DV
xx
xx
xx
xx
Error information
C141-E055-01EN
1 1 1 1
xx
xx