Error Rate; Media Defects - Fujitsu MPC3096AT - Desktop 9.7 GB Hard Drive Product Manual

Product manual
Hide thumbs Also See for MPC3096AT - Desktop 9.7 GB Hard Drive:
Table of Contents

Advertisement

(4)
Data assurance in the event of power failure
Except for the data block being written to, the data on the disk media is assured in the event of
any power supply abnormalities. This does not include power supply abnormalities during
disk media initialization (formatting) or processing of defects (alternative block assignment).
1.8

Error Rate

Known defects, for which alternative blocks can be assigned, are not included in the error rate
count below. It is assumed that the data blocks to be accessed are evenly distributed on the
disk media.
(1)
Unrecoverable read error
Read errors that cannot be recovered by maximum 126 times read retries without user's retry
and ECC corrections shall occur no more than 10 times when reading data of 10
retries are executed according to the disk drive's error recovery procedure, and include read
retries accompanying head offset operations.
(2)
Positioning error
Positioning (seek) errors that can be recovered by one retry shall occur no more than 10 times
7
in 10
seek operations.
1.9

Media Defects

Defective sectors are replaced with alternates when the disk is formatted prior to shipment
from the factory (low level format). Thus, the host sees a defect-free device.
Alternate sectors are automatically accessed by the disk drive. The user need not be concerned
with access to alternate sectors.
Chapter 6 describes the low level format at shipping.
1 - 10
C141-E055-01EN
15
bits. Read

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpc3032atMpc3043atMpc3064atMpc3084atMpc3102at

Table of Contents