IBM NetVista Hardware Manual page 37

To view the computer information such as the model number, serial number, and BIOS version and date, select the Product Data option
from the Setup main menu. The items displayed are not configurable.
Devices and I/O ports
The options in this menu item are used to configure the devices and I/O ports that this system has.
Mouse
This setting allows you to select whether or not a mouse is installed.
Diskette Drive A
Determines the type of Diskette Drive A.
Serial Port Setup
Determines the I/O port address and Interrupt Request Number of 2 serial ports.
Parallel Port Setup
Determines the I/O port address and the Interrupt Request Number of parallel port.
USB Setup
Use these settings in this menu item to enable or disable the Universal serial Bus (USB) functions.
USB Support
Select enabled if you will be using USB devices.
USB Keyboard / Mouse Support
Select Autodetect if you want this support enabled. The USB Support must also be set to enabled before you use USB /Keyboard Mouse
Support. Select disabled if you will not be using a USB Keyboard /Mouse.
IDE Drives Setup
Use these settings to view the hard disk and CD-ROM drives that are installed in your computer.
Your computer will show the size and selectable performance of a hard disk drive when it is installed. To get better performance, run IDE
hard disk and CD-ROM drives in High Performance Mode.
Video setup
Select this menu item to configure the video settings.
Select Active Video
Select active video mode when the computer is started. If the selected video is not available, the computer will select a default video.
Palete Snooping
Select enabled if an ISA video multimedia adapter is installed in your computer and incorrect colors are displayed on the screen and your
system has a PCI video adapter installed that supports Palete Snooping.
Video Interrupt
Select enabled if you are using an application that requires this support.
Audio Support
Use this setting to enable or disable the Audio function if your computer has the audio feature.
Network Setup
Use this setting to enable or disable the Network function.
37