Replacing a memory module
This section provides instructions on how to replace a memory module.
1. Remove the computer cover. See "Removing the covers" on page 86.
2. Locate the memory connectors. See "Identifying parts on the system board" on
3. Open the retaining clips and remove the failing memory module.
4. Position the new memory module over the memory connector. Make sure that
5. Go to "Completing the FRU replacement" on page 105.
88
Lenovo 3000 E100
page 85.
the notch 1 on the memory module aligns correctly with the connector
key 2 on the system board. Push the memory module straight down into the
connector until the retaining clips close.