Replacing The Media Card Reader - Lenovo E100 Hardware Maintenance Manual

Replacing the Media Card Reader

This section provides instructions on how to replace the Media Card Reader.
1. Open the front bezel. See "Removing and replacing the front bezel" on page 87.
2. Locate the Media Card Reader. See "Locations" on page 84
3. Disconnect the Media Card Reader cable connected to the system board. See
"Identifying parts on the system board" on page 85
4. Remove the screw that secures the Media Card Reader to the Chassis.
5. Remove the Media Card Reader from the chassis.
101
Chapter 8. Replacing FRUs (Type 9626)