Viewing The Test Log - Lenovo E100 Hardware Maintenance Manual

v Provides an estimate of time to completion along with a visual representation of
v Provides messages that warn the user about non-recoverable process.
To select the Quick Erase or Full Erase Hard Drive utility, use the following
procedure:
1. Select the UTILITY option on the toolbar and press Enter.
2. Select either the QUICK ERASE or FULL ERASE HARD DISK option and

Viewing the test log

Errors reported by the diagnostic test will be displayed by the program as a failed
test.
To view details of a failure or to view a list of test results, use the following
procedure from any test category screen:
1. Press F3 to activate the log file.
2. Press F3 again to save the file to diskette or press F2 to print the file.
completion status.
Important: Make sure that all data is backed up before using the Quick or Full Erase
functions.
follow the instructions.
47
Chapter 5. Diagnostics