ZyXEL Communications P-2301R/RL-P1C Support Notes page 72

Step 8. Click on Apply to save the setting and take effect. If you would like to configure the 2nd SIP account,
please select SIP2 by using the SIP account selector than follow step 1 to 8 to complete the 2nd account setup.
Note: If more than both SIP number are associated both phone port you will not be able to identify which
account is being called for the incoming call.
Each field's detail description on this page is listed below.
Label
SIP Account
SIP Number
SIP Local Port Use this field to configure the ZyXEL device's listening port for SIP. Leave
SIP Server Type the IP address of the SIP server in this field.
Description
You can configure the ZyXEL device to use multiple SIP accounts. Select
one to configure its settings on the ZyXEL device.
A SIP account's Uniform Resource Identifier (URI) identifies the SIP
account in a way similar to the way an e-mail address identifies an e-mail
account. It is also known as a SIP identity or address. The format of a SIP
identity is SIP-Number@SIP-Srevice-Domain.
A SIP number is the part of the SIP URI that comes before the "@" symbol.
Enter your SIP number in this field. You can use up to 31 ASCII
characters.
this field set to the default if you were not given a local port number for SIP.
All contents Copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2301R/RL-P1C Support Notes
72