Using The Toolbar - Autodesk 15606-011408-9320 - MAPGUIDE R6.3 CPU MODEL-UPG 4/5 MIN 2 CPUS INITL User Manual

Popup Menu Commands (continued)
This command...
Select
View
Help
All of the commands in the popup menu are also available from the menu
bar, and many of the same commands are available in the toolbar.

Using the Toolbar

You use the toolbar to access the most commonly used commands. To use the
toolbar, simply click a button to perform that command.
The following table lists each toolbar button, its associated command, and a
brief description of the action that results.
Toolbar Buttons
Button Command
New
Open
Does this...
Accesses the Select commands, which you can use
to select features on the map in various ways.
Accesses the View commands, which you can use
to view a report, create buffers, or measure dis-
tances on the map.
Accesses the Help commands, which you can use
to set preferences for the map window, access the
Autodesk MapGuide Help contents, and view ver-
sion and copyright information for Autodesk
MapGuide Author. In Autodesk MapGuide Viewer,
the Help commands bring up help specific to
using the Viewer.
Description
Creates a new map, starting with a map of the world.
Opens an existing map file on a local or network drive.
Introduction to the Program Window Layout
|
123