Installing Autodesk Mapguide Author - Autodesk 15606-011408-9320 - MAPGUIDE R6.3 CPU MODEL-UPG 4/5 MIN 2 CPUS INITL User Manual

Installing Autodesk MapGuide Author

The setup program for Autodesk MapGuide Author 5 installs the software in
a separate directory and program group specifically for Release 5. If you have
more than one release of Autodesk MapGuide Author installed at the same
time, you can try out the new release while still running the previous release.
You can also uninstall older releases without affecting the current release.
Note Before you install Autodesk MapGuide Author, log on to Windows as an
administrator or as a user who has administrative privileges. If you are using Win-
dows 2000, you must have Power User/Administrator rights to install Autodesk
MapGuide Author. This is required for the installation process only; you can log
on as any user to run Autodesk MapGuide Author after you have installed it.
1 Insert the CD in the CD-ROM drive.
2 On the CD Browser screen, click Install Autodesk MapGuide Author.
Note If the installation does not start automatically when you insert the CD
in the drive, click the Start button on the Windows Taskbar, and then choose
Run. In the Run dialog, type d:\setup, where d: is your CD-ROM drive.
3 Click Next in the Welcome screen, read the software license agreement,
and then click Yes to accept the agreement.
4 When setup prompts you to enter your serial number and authorization
code, do one of the following:




5 When prompted, accept the default installation directory, or click Browse
to specify a different directory.
6 Click Next, and then follow the remainder of the screen instructions.
|
118 Chapter 7 Getting Familiar with Autodesk MapGuide Author
If you are installing an evaluation copy, you do not need to enter a
serial number or authorization code—click OK.
If you are installing a registered copy, enter your serial number and
authorization code, and then click OK. Your serial number is the 11-
digit number that is located on both the software registration card and
the back of the CD case. For instructions on obtaining an authorization
code from Autodesk, refer to the Read This First card that came with
your product documentation. Note that if you are upgrading from a
previous release, you will need a new authorization code for Release 5.