Smooth Fitness 6.75 User Manual page 8

8 6.75 TREADMILL
ASSEMBLY
STEP 3: Assemble the Upright
1. Take off screws "O" fixed on bracket.
2. Hold console on console tube as illustrated. (FIG-5)
3. Connect PCB cables "G1" and "G2." (FIG-5)
Pinch Point Warning Take
4. Connect handle pulse cables "H1" and "H2." (FIG-5)
caution not to pinch wire
harness
5. Connect the Speed Control Harness "l1" and "l2." (FIG-5)
6. Connect Incline Control Harness "J1" and "J2." (FIG-5)
Note: Insert excess wire harness into right side of console tube.