Enter a number of frames per packet in the neighboring edit box FPP with due regard to the
endpoint capability and buffer size. Information about codec frame sizes is given in the table
below.
Table 2 Frame sizes by codecs
Codec
G.729
G.729A
G.723
G.711-aLaw
G.711-uLaw
GSM 06.01
Therefore, if an endpoint can accept no more than, say, 60ms worth of audio per packet, for
G.711 you can enter the value 60; for G.723 it will be 2 (60/30 = 2); for G.729 it would be 6
(60/10 = 6).
Note:
values in multiples of ten only.
You can increase/decrease codec precedence in the table by clicking up- and down-arrow
buttons.
Click
Click
Click
To add the new user record to the population of configured users, click
DVX-7090 VoIP Router
Frame size
10 ms
10 ms
30 ms
1 ms
1 ms
20 ms
Please, remember that for G.711 codecs it makes sense to enter "frames per packet"
to move the codec record up one line and increase the codec precedence.
to move the codec record down one line thus decreasing the codec precedence.
to delete the codec record.
, to cancel the made changes.
Fig. 18 Codeсs options
Configuration
. Click
page 22 of 83