Management Options; Web User Interface - D-Link DWM-312 Quick Installation Manual

Management Options

Before You Begin
The D-Link router can be managed by using the Web User
Interface (Web UI), Telnet, or Simple Network Management
Protocol (SNMP) management interfaces. If you wish to
manage a single D-Link router, the Web UI may be the best
option. Each router must be assigned its own IP address,
which is used for communication with the management PC.
Please refer to the following installation instructions to get
started with the Web UI and SNMP management interfaces.

Web User Interface

Once the router has been successfully installed, you can begin
configuration, monitor the LED panel, and display graphical
statistics using a web browser. Supported browsers include:
Microsoft Internet Explorer , Firefox, Chrome, and Safari.
®
You need the following equipment to access the Web UI of
your device:
• A PC with a RJ-45 Ethernet port
• A standard Ethernet cable
1. Connect the Ethernet cable to the router's Ethernet port and
to the Ethernet port on the PC.
2. Configure the PC's IP address to be in the network segment
as the router. The router's default IP address is 192.168.0.1,
with subnet mask 255.255.255.0.
DWM-312
11