Table of Contents
Advertisement
Management Options
Before You Begin
The D-Link router can be managed by using either the Web
User Interface (Web UI) or Telnet management interfaces.
If you wish to manage a single D-Link router, the Web UI
may be the best option. Each router must be assigned
its own IP address, which is used for communication
with the management PC. Please refer to the following
installation instructions to get started with the Web UI.
Web User Interface
Once the router has been successfully installed, you can begin
configuration, monitor the LED panel, and display graphical
statistics using a web browser. Supported browsers include:
Microsoft
You need the following equipment to access the Web UI of
your device:
•
A PC with a RJ-45 Ethernet port
•
A standard Ethernet cable
1. Connect the Ethernet cable to a LAN port on the router and
to the Ethernet port on the PC.
2. Configure the PC's IP address to be in the same network
segment as the router. The router's default IP address is
192.168.0.1, with subnet mask 255.255.255.0.
10
Internet Explorer , Firefox, Chrome, and Safari.
®
DWR-926
Advertisement
Table of Contents
