Installation And Connection; Fig. 3 Dvx-7090 Front Panel - D-Link DVX-7090 User Manual

Voip router

Hide thumbs Also See for DVX-7090:

Table of Contents

NSTALLATION AND CONNECTION

Prepare a Windows workstation connected to the local area network. You will need the

workstation to access the newly installed Router.

To install and power on your DVX-7090 VoIP Router, proceed as follows:

1. Unpack the supplied Router and install the box at a location of your choice

2. Connect the DVX-7090 VoIP Router to the LAN switch through the Ethernet port (port

3. The Windows workstation that you have prepared and the VoIP Router box must be on

4. Switch on the Router. It takes some 30-40 seconds to load and start the VoIP Router

5. Start the Internet Explorer web browser on the Windows workstation and enter the URL

6. To log in with the administrator's permissions, enter the default login and password –

7. Configure the system as described in Ch. 4 and Ch. 5 of this guide

8. When through with the configuration, reboot the VoIP Router by clicking the

9. Switch off the VoIP Router box and unplug the networking cable from the Ethernet port

10. Plug in the networking cable into the WAN port (port 1 in Fig. 3) to make the VoIP

Now you can use any web browser to access the DVX-7090 Router and configure the system

working remotely.

DVX-7090 VoIP Router

2 in Fig. 3)

the same network. To ensure this, create a network alias for subnet 192.168.224.0 on the

Windows workstation (see section 5.10 for details).

applications.

http://192.168.224.226

to access the Router's logon page.

admin, qwerty.

button on the page 'Configuration' of the Web interface.

(see port 2 in Fig. 3)

Router accessible at URL http://<WAN_IP> where <WAN_IP> is the assigned IP

entered in the field IP address of the WAN settings dialog.

Installation and connection

page 9 of 83

Table of Contents

Table of Contents