Advertisement
(6) Vertical Size [~]
Adjust this contxol to the preferred height.
(7) Vertical Position [Q
1
Adjust this to place the display at the centre of the screen.
(8) Signal Cable
Connect the end of the cable to your computer.
(9) Power Cord Tn-let Connector
Insert proper power cord here.
BEFORE CONNECTING
TEE MONITOR TO YOUR
COMPUTER,
MAKE SURE TEE POWER TO TEE MONITOR
AND COMPUTER
ARE TURNED OFF.
1. Connect the signal cable to your computer's video output comector.
'l%ecormec-
tor is compatible with IBM PS/2 series computers and VGA standard graphics
cards for IBM PC, PC/XT, PC/AT, and compatibles.
When you are using the
monitor with Apple Macintosh H computer, please obtain an optional converter for
comection
from your dealer.
2. Connect power cord to the monitor then to wall power outlet.
Use the power cord set enclosed with monitor or properly approved power cord, for
example, H05 W-F.
3. Power on the monitor then power on your computer. When you switch OFF,
reverse the sequence.
4. Adjust front located user controls to obtain right picture size, location, and
brightness. Display location on the screen and the size may change when you switch
from one application software to another one.
5. Adjust Tilt& Swivel to suit your eye level.
DO NOT use the monitor with a bright background light, direct sunshine, or bright
light into the screen area. These may increase eye fatigue.
Earth magnetic
field can affect the display
screen, therefore,
when the
monitor is turned on the bases and shows impurity. of color, power off the
monitor then power on to activate
automatic
degauss
circuit.
Do not make
this sequence
too quick.
14MVX Plus User Maimal 7
Advertisement
