Advertisement
(6) Vertical Size
Adjust this control to the preferred height.
(7)
Vertical Position
Adjust this to place the display at the centre of the screen.
(8) Signal Cable
Connect the end of the cable to your computer.
(9) Power Cord In-let Comector
Insert proper power cord here.
BEFORE CONNECTING
THE MONITOR
TO YOUR
COMPUTER,
MAKE SURE THE POWER TO THE MONITOR
AND COMPUTER
ARE TURNED OFF.
1. Connect the signal cable to your computer's video output connector. The connec-
tor is compatible with IBM P.S./2 series computers and VGA standard graphics
cards for IEM PC, PC/XT, PC/AT, and compatibles. When you are using the
monitor with Apple Macintosh II computer, please obtain an optioml converter for
connection from your dealer. Hitachi's pantnumber for converter: SC-1
2. Connect power cord to the monitor then to wall power outlet.
USE PROPER UL/CSA APPROVED POWER CORD...HO5F-F
3. Power on the monitor then power on your computer. When you switch OFF, do
the reverse sequence.
4, Adjust front located user controls to obtain right picture size, location, and
brightness. Display location on the screen and the size may change when you switch
one application software to another one.
5. Adjust Tilt& Swivel to suit your eye level.
DO NOT use the monitor with a bright background light, direct sunshine, or bright
light into the screen area. These may increase eye fatigue.
Earth magnetic field can affect the display screen, therefore,
when the
monitor is turned on the bases and shows impurity of color, power off the
monitor then power onto activate automatic degauss circuit. Do not make
this sequence too quick.
15.MVX
User Manual 5
Advertisement
