Function Menu Setting List; Menu Function Setup; General Setup Page; Audio Setup Page - Hitachi AX-M140 Instruction Manual

If you change the sleep timer, each time you press the sleep button (
the number of minutes shown on the VFD in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the
display as before setting the sleep timer.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time
When pressing the sleep button (
seconds the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the sleep button (
It can also cancel the sleep timer by restart set the clock or turning off the system.

Function Menu Setting List

Caution: The content of this chart is for reference only. If something has changed, please take the actual
display for standard.

Menu function setup

* If you want to set the function of this unit, please press the function setting button (
to display the DVD function setting main menu, then use the , , ,
button. Press the function setting button (
menu.
(Note: If the item displays in gray, that means that it can't be setup and there isn't this
function in the disc.)

General Setup Page

- -
15 10 20
...
80 90
), the remaining sleep time is displayed. After a few
SLEEP
) until the "00" displays on the VFD.
SLEEP
) again to exit the function setting main
SETUP
TV Display
This menu allows the user to select the aspect ratio of
the TV to be connected.
Angle Mark
Available only when the disc is with angle marks, you
can set the angle mark to show on TV screen or not.
OSD Language
This menu allows the user to select the language for
the on-screen.
Captions
Set the captions to display or not.
Screen Saver
Set the screen saver to activate or not.
Last Memory
Set the last memory state to on or off.
- 21 -
SLEEP
00
buttons and
), it changes
)
SETUP
ENTER