Table of Contents
Advertisement
Multiplex Name
The bottom line displays the Ensemble/Multiplex name centred (in the long name format, max. 16
characters).
Pressing INFO three times will give you the following option:
Signal Quality
The bottom line displays a graphical representation of the signal quality of the ensemble currently
being decoded and shows an indication of the minimum signal quality necessary for successful
decoding.
Poor signal quality...
Good signal quality...
The solid block is used to denote the point at which signal quality (hence audio quality) becomes
acceptable. Below this point audio may still decode, but audio artefacts (first burbling, then
muting) will be heard.
This display will be continuously updated so that the user can use it to position the radio to obtain the
best reception.
Pressing INFO four times will give you the following option:
Time and Date
The bottom line displays the time and the date in the following format.
FM Radio
Power on
If the tuner was last used in FM mode, then the tuner will start up in that mode.
This message will be displayed for 2 seconds.
System Reset
If the Menu button is held down whilst the unit is powered on, then this is used to initiate a full system
reset.
The following message will be displayed for at least 3 seconds.
Planet Rock DAB
CE London
Planet Rock DAB
Planet Rock DAB
Planet Rock DAB
17:23 06.08.2003
Switching to
FM
System Reset
- 15 -
Hide quick links:
Advertisement
Table of Contents
