Hitachi AX-M140 Instruction Manual page 14

Hide thumbs Also See for AX-M140:
Table of Contents

Advertisement

DAB Radio
Power on
The receiver will remember whether the tuner was last used in DAB or FM mode and start up in that
mode. In the case of DAB mode (or if it is the first time the unit has been powered on) the following
message will be displayed for 2 seconds.
Hitachi DAB Radio
System Reset
If the MENU button is held down whilst the unit is powered on, then this is used to initiate a full system
reset.
The purpose of the system reset is to clear (both DAB & FM) station databases and reset all persis-
tent variables to their default state.
Another use for this function is if the user travels to another location with the unit and wishes only the
stations for that location to be displayed.
The following message will be displayed for at least 1 seconds.
System Reset
The unit will automatically enter the Station Search /Auto Tune sequence, searching all of Band for
active ensembles.
'Auto'Tune
This button on the remote activates the 'Auto' Tune function which searches for available DAB en-
sembles and when it locates a valid ensemble it enters the details into the database.
If the button is held down for over 2 seconds then a Full scan is initiated, instead of the usual Quick
scan.
Up/Down Buttons (or SEL-/SEL+ on remote)
These buttons are used to select new stations/services.
Menu Button (DAB Mode)
This button (on the unit and remote) is used to confirm new station/service selection. If the button is
held down for more than 2 seconds then manual tuning is activated.
Scrolling Text
The bottom line displays transmitted text giving information regarding the tuned station transmission.
Storing Stations on Preset Buttons 0-9
If a preset button is pressed and held for at least 2 seconds, then that assigns the current station to
the selected preset.
After 3 seconds the display reverts to the current display mode.
Planet Rock DAB
Preset 04 Stored
Recalling Station
If a preset button is pressed and released, then that initiates tuning to the station previously stored
under that preset.
Classic
DAB
Tuning...
- 13 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents