Settings
Network Settings
Displays and configures network settings.
Item
IP Configuration
DHCP ON
DHCP OFF
IP Address
Subnet Mask
Default Gateway
Projector Name
SysLocation
SysContact
Click the [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
8
Configures network settings.
Enables DHCP.
Disables DHCP.
Configures the IP address when DHCP is disabled.
Configures the Subnet Mask when DHCP is disabled.
Configures the Default Gateway when DHCP is disabled.
Configures the Projector name.
Configures the location to be referred to when using SNMP.
Configures the contact information to be referred to when
using SNMP.
Description