Hitachi CP-S245 User Manual page 41

NETWORK Menu (continued)
Item
DEFAULT
GATEWAY
DATE AND TIME
TIME
DIFFERENCE
e-SHOT
Entering the DEFAULT GATEWAY :
Use the ▲/▼/◄/► buttons to enter the DEFAULT
GATEWAY (therouter or PC that forwardstraffic to a
destination outside of the subnet of the transmitting
device) address.This function can only be used
when DHCP is set to "TURN OFF".
Entering DATE AND TIME :
Use the ▲/▼/◄/► buttons to enter the Year (last two digits),
Month, Date, Hour and Minute.
~Note~
The projector will override this setting and retrieve DATE AND TIME
information from the Timeserver when SNTP is enabled. See [Date/
Time Settings] in [User's Manual - Network Functions: Configuring
and Controlling the Projector via a Web Browser] for SNTP settings.
Entering the TIME DIFFERENCE :
Use the ◄/► buttons to enter the
TIME DIFFERENCE.
Set the same TIME DIFFERENCE
as the one set on your PC. If unsure,
consult your network administrator.
Use the ▲ button to return to the menu
after setting the TIME DIFFERENCE.
e-SHOT display :
Use the ▲/▼ buttons to select an item and the ► or ENTER
buttons to display the image.
Image1
Image2
Image3
Image4
Once an image is displayed, you can
use the ▲/▼ buttons to page through
the images. Use the ◄ or ESC buttons
to return to the menu.
Pressing the RESET button on the
remote control while an image is being
displayed will display the RESET menu.
The displayed image can be deleted
from the RESET menu using the
ENTER button on the remote control or
the INPUT button on the projector.
If you do not wish to delete the image use the ESC button on the remote
control or push the ◄ and INPUT buttons on the projector at the same time.
~Note~
• Items with no image stored cannot be selected.
• Images can be changed using the ▲/▼ buttons while the image data downloads.
Multifunctional settings
Operation
e‑SHOT
IMAGE‑1
IMAGE‑2
IMAGE‑3
IMAGE‑4
e‑SHOT
RESET : IMAGE‑1
, + :NO , :YES
ESC
0. 0. 0. 0
DEFAULT GATEWAY
TIME DIFFERENCE
GMT 00:00
IMAGE‑1
ENTER
41