Multifunctional settings
SETUP Menu
With the SETUP menu, the items shown in the table below
can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item
KEYSTONE
WHISPER
MIRROR
VOLUME
AUDIO
34
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data Lower in the data
• The adjustable range of this function will vary with the type of input
signal. At some signals, this function may not work well.
• When the V:INVERT or the H&V:INVERT is selected under the
item MIRROR, if the projector screen is inclined or if the projector is
angled downward, this function may not work correctly.
• When the zoom adjustment is set to the TELE side, this correction
may be excessive. This function should be used with zoom set to
WIDE whenever possible.
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL H:INVERT V:INVERT H&V:INVERT
Using the buttons ▲/▼ adjusts the volume.
High Low
Choose an input port using the buttons ▲/▼
(1), then select the audio port to be interlocked
with the input port using the buttons ◄/► (2).
When off is selected, both of two audio ports
do not work for the input port.
(1) RGB1 RGB2 COMPONENT S-VIDEO VIDEO
(2) 1 2
MENU [RGB]
Description
:SELECT
PICTURE
KEYSTONE +0
IMAGE
WHISPER NORMAL
INPUT
MIRROR NORMAL
SETUP
VOLUME 16
SCREEN
AUDIO
OPTION
NETWORK
EASY MENU
AUDIO
QUIT
1 2
RGB1
RGB2
COMPONENT
S‑VIDEO
VIDEO