PICTURE Menu
With the PICTURE menu, the items shown in the table
below can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item
BRIGHTNESS
CONTRAST
GAMMA
Using the buttons ▲/▼ adjusts the brightness. :
Using the buttons ▲/▼ adjusts the contrast. :
Using the buttons ▲/▼ switches the GAMMA mode.
#1 DEFAULT #1 CUSTOM #2 DEFAULT
#3 CUSTOM #3 DEFAULT #2 CUSTOM
To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM
Selecting a mode of CUSTOM and then
pressing the button ► or the ENTER button
displays a dialog to aid you in adjusting the
mode.
This function is useful when you want to
change the brightness of particular tones.
Choose an item using the buttons ◄/►, and
adjust the level using the buttons ▲/▼.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern Gray scale of 9 steps
Ramp Gray scale of 15 steps
The eight equalizing bars correspond to eight tone levels of the
test pattern except the darkest in the left end. If you want to adjust
the 2nd tone from left end on the test pattern, use the equalizing
adjustment bar "1". The darkest tone at the left end of the test
pattern cannot be controlled with any of equalizing adjustment bar.
• When this function is performed, a certain extra such as a line
may appear.
Multifunctional settings
Description
MENU [RGB]
:SELECT
PICTURE
BRIGHTNESS +0
IMAGE
CONTRAST +0
INPUT
GAMMA DEFAULT 1
SETUP
COLOR TEMP MIDDLE
SCREEN
COLOR +0
OPTION
TINT +0
NETWORK
SHARPNESS 3
EASY MENU
PROGRESSIVE TURN OFF
MY MEMORY SAVE 1
Light Dark
Strong Weak
ENTER :
1
2
3
4
5
6
7
8
+0
+0
+0
+0
+0
+0
+0
+0
GAMMA [ CUSTOM 1 ]
27