Freezing The Screen; Temporarily Blanking The Screen - Hitachi CP-S245 User Manual

Operating

Freezing the screen

1.
Press the FREEZE button on the remote control.
The "FREEZE" indication will appear on the screen, and the
projector will enter the FREEZE mode.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
● The projector automatically exits the FREEZE mode when the input signal
changes, or when one of the projector's buttons or the remote control buttons
of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME,
MUTE, KEYSTONE, POSITION and MENU is pressed.
● If the projector continues projecting a still image for long time, the LCD panel
might possibly be printed. Do not leave the projector in the FREEZE mode for
too long.

Temporarily blanking the screen

1.
Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in the SCREEN
menu
(35).
To exit the blank screen and return to the input signal screen, press the
BLANK button again.
● The projector automatically returns to the input signal screen when the input
signal is changed, or when one of the projector's buttons or the remote control
buttons is pressed.
22
SEARCH
VIDEO RGB
BLANK
ASPECT AUTO
MAGNIFY
PAGE UP VOLUME
HOME
ON
END PAGE DOWN MUTE
OFF
FREEZE
KEYSTONE
POSITION MENU
ENTER
RESET
ESC
SEARCH
VIDEO RGB
BLANK
ASPECT AUTO
MAGNIFY
PAGE UP
HOME VOLUME
ON
PAGE DOWN MUTE
END
OFF
FREEZE
KEYSTONE
POSITION MENU
ENTER
RESET
ESC