Warranty And After-Service; Specifications - Hitachi CP-S245 User Manual

Warranty and after-service

If a problem occurs with the equipment, first refer to the "Troubleshooting" and run
through the suggested checks. If this does not resolve the problem, please contact your
dealer or service company. They will tell you what warranty condition is applied.
Specifications
NOTE • These specifications are subject to change without notice.
Item
Product name
Panel size
Liquid
Drive system
Crystal
panel
Pixels
Lens
Lamp
Speaker
Power Supply
Power Consumption
Temperature range
Size
Weight (mass)
Ports
Lamp
Optional
Air filter
parts
Others
Liquid crystal projector
1.5 cm (0.6 type)
TFT active matrix
CP-S245 : 480,000 pixels (800 horizontal x 600 vertical)
CP-X255 : 786,432 pixels (1024 horizontal x 768 vertical)
Zoom lens F=1.7 ~ 1.9 f=18.9 ~ 22.6 mm
180W UHB
1W x 1
AC100-120V/3.1A, AC220-240V/1.7A
290W
5 ~ 35°C (Operating)
306 (W) x 86 (H) x 249 (D) mm
(Not including protruding parts)
• Please refer to the following figure.
3.0 kg
RGB input:
RGB IN1 ..D-sub 15pin mini x1
RGB IN2 /OUT
D-sub 15pin mini ................x1
(select RGB IN2 or RGB OUT)
Audio input:
AUDIO 1 .......... Stereo mini x1
AUDIO 2 ..................... RCA x2
Audio output:
AUDIO OUT ... Stereo mini x1
DT00731
NJ22222
• Please consult your dealer.
Warranty And After-Service
Specification
Video input:
COMPONENT VIDEO
(Y, C /P
B B,
S-Video ................................ 1
Video .................................... 1
Communication port:
CONTROL ............ D-sub 9pin x1
USB ....................... USB(B) x1
LAN .......................... RJ-45 x1
Specifications
C /P ) ...... RCA x3
R R
55