Multifunctional Settings; Using The Menu Function - Hitachi CP-S245 User Manual

Multifunctional settings

Multifunctional settings

Using the menu function

This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN,
OPTION, NETWORK and EASY MENU. EASY MENU cosists of functions often used,
and the other menus are classified into each purpose. Each of these menus is operated
using the same methods. The basic operations of these menus are as follows.
1.
Press the MENU button on the remote control or one of
the cursor buttons on the projector.
The Advanced MENU or EASY MENU will appear.
In the EASY MENU
2.
If you want to change it to the Advanced MENU, select the
"Go to Advanced Menu"
3.
Use the cursor buttons ▲/▼ to select an item to operate.
4.
Use the cursor buttons◄/► to operate the item.
In the Advanced MENU
2.
Use the cursor buttons ▲/▼ to select a menu.
If you want to change it to the EASY MENU, select the
EASY MENU.
Then press the cursor button ► on the projector or remote
control, or the ENTER button on the remote control to select
an item. The display of the selected menu will be active.
3.
Use the cursor buttons ▲/▼ to select an item to operate.
Then press the cursor button ► on the projector or remote control, or the ENTER button
on the remote control to progress. The operation menu of the selected item will appear.
4.
Use the cursor buttons▲/▼ to operate the item.
● When you want to reset the operation, press the RESET button on the remote control
during the operation. Note that items whose functions are performed simultaneously
with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.
● In the advanced menu, when you want to return to the previous display, press the cursor
button ◄ on the projector or remote control, or the ESC button on the remote control.
5.
Press the MENU button on the remote control again to close the menu
and complete this operation. Even if you don't do anything, the dialog will
automatically disappear after about 10 seconds.
● Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed.
24
MENU button
ENTER button
Cursor buttons
RESET button
VIDEO RGB SEARCH
BLANK
ASPECT AUTO
MAGNIFY
PAGE UP
HOME VOLUME
ON
PAGE DOWN MUTE
END
OFF
FREEZE KEYSTONE
VIDEO RGB
ASPECT
POSITION MENU
MAGNIFY
HOME
ON
END
OFF
FREEZE
ENTER
POSITION
ESC RESET
ESC
MENU [RGB]
PICTURE BRIGHTNESS ＋0
IMAGE CONTRAST ＋0
INPUT GAMMA DEFAULT 1
SETUP
COLOR TEMP MIDDLE
SCREEN COLOR +0
OPTION TINT +0
NETWORK
SHARPNESS 3
EASY MENU
PROGRESSIVE TURN OFF
MY MEMORY SAVE 1
EASY MENU
ASPECT 4:3
KEYSTONE
MODE
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
WHISPER
MIRROR
RESET
FILTER TIME
LANGUAGE
Go To Advance Menu...
SEARCH
AUTO BLANK
PAGE UP
VOLUME
PAGE DOWN MUTE
KEYSTONE
MENU
ENTER
RESET
:SELECT
+0
NORMAL
+0
+0
+0
+0
3
NORMAL
NORMAL
0h
ENGLISH