Port Settings - Hitachi CP-S245 User Manual

Port Settings

Displays and configures communication port settings.
Item
Network Control Port1
(Port:23)
Port open
Authentication
Network Control Port2
(Port:9715)
Port open
Authentication
Image Transfer Port
(Port:9716)
Port open
Authentication
SNMP Port
Port open
Trap address
SMTP Port
Port open
Click the [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. The network connection must be restarted when the
configuration settings are changed. The network connection can be restarted
using [Network Restart] on the main menu.dresses.
Configures command control port 1 (Port:23).
Click the [Enable] check box to use port 23.
Click the [Enable] check box when authentication is required
for this port.
Configures command control port 2 (Port:9715).
Click the [Enable] check box to use port 9715.
Click the [Enable] check box when authentication is required
for this port.
Configures the image transfer port (Port:9716).
Click the [Enable] check box to use port 9716.
Click the [Enable] check box when authentication is required
for this port.
Configures the SNMP port.
Click the [Enable] check box to use SNMP.
Configures the destination of the SNMP Trap in IP format.
Configures the SMTP port.
Click the [Enable] check box to use the e-mail function.
Description
Settings
9